QUALITY COMES FROM TEST

Maintenance Method Of Ring Crush And Edge Tester

Views: 22     Author: Site Editor     Publish Time: 2017-02-25      Origin: Site

Maintenance Method Of Ring Crush And Edge Tester


Instrument introduction:

Ring Crush And Edge Compressive Tester is applied to test anti-rupture strength for raw paper, corrugated cardboard, leather, cloth and synthetic leather. Record the value of force, automatically keep the maximum value of fracture strength, decomposition degrees has improved 100 times than the needle display type. This equipment is important to control the quality product.


Instrument advantage:

1. Small, powerful, can do a variety of tests.


2. USB interface link computer, professional software, can be connected to the printer, the test data is perfect, the results at a glance.


3. Through innovation, making the operation process is simple, to solve the complex problems encountered in customer operations!


4. Import sensor, servo motor, ball screw, stable performance, high precision; pure steel base, the quality is very good!


5. Simple and generous appearance, excellent production process, in line with the normal aesthetic!


图片1.png


Instrument maintenance:

1、Ring Crush And Edge Compressive Tester working environment and conditions: Ring Crush And Edge Tester should be in full compliance with the requirements, including room temperature, relative temperature, power supply voltage, installed base (around the general requirements, no vibration, no corrosive medium, strong electromagnetic interference), also some instruments on the environment and special requirements, should be strictly in accordance with the instructions for use and maintenance;


2、Before and after use should be kept clean and avoid collision;


3,  A long time when not using the test instrument, it is appropriate to start the plug;


4、The Ring Crush And Edge Tester should be responsible for the person, the test should be strictly in accordance with the operating procedures, is prohibited to do beyond the scope of the trial test, the test should be restored to the initial position of the instrument to ensure that the next test is normal;


5、The Ring Crush And Edge Tester should be cleaned regularly, testing, calibration of the instrument should be calibrated to ensure the accuracy of the instrument;


6、The Ring Crush And Edge Tester is not in use, should take appropriate protective measures, such as long time no use, re-use should be re inspection before use;


7、Regular correction: according to the relevant provisions of the National Metrology Law, the general correction period of one year;


8、Temporary correction: If the user find, or quality management unit in the circuit test find that the test instrument is not accurate, should be corrected immediately.


 

Company introduction:

HAIDA INTERNATIONAL is a professional manufacturer of various kinds of testing equipments over 24 years. HAIDA products are widely used in paper products, packaging, ink printing, adhesive tapes, bags, footwear, leather products, environment, toys, baby products, hardware, electronic products, plastic products, rubber products and other industries, and applicable to all scientific research units, quality inspection institutions and academic fields.


FOLLOW US

SHARE US ON

 
Copyright © Haida Equipment Co.,Ltd.     Site Map     Powered by Haida