QUALITY COMES FROM TEST

All Products

content is empty!

loading

Share to:
sharethis sharing button

Horizontal Vibration Tester

Vibration testing machine is suitable for various industries such as electronics, electromechanical, optoelectronics, automobile locomotives, toys, etc. Research, development, quality control, manufacturing.
Availability:
Quantity:
  • HD-G826

  • Haida

Horizontal Vibration Tester
 

Introduction:

Electromagnetic vibration table is widely used in defense, aviation, aerospace, communications, electronics, automobiles, home appliances, and other industries。


Horizontal Vibration Tester is used for discovering the early faults, simulating the actual working condition and the structure strength test, the product application is wide, the application width is obvious, the test effect is remarkable and reliable. 

 
 
Features of electrodynamic shake vibration tester
1. Well designed dynamic circle skeleton, with a higher s
tage axial resonance frequency. 
2. Two magnetic circuit, magnetic flux leakage low, compact structure and rational. 
3. Rocker Rod roller bearings straight and import-oriented composite body stiffness orientation, eccentric load capacity. 
4. Trunnion isolation foundation dedicated to hormone use, the installation of mobile convenience. 
5. Advanced technology move around the system to ensure that the dynamic circle of high reliability. 
6. New duct design and enhance the cooling effect. 
7. Static stiffness, dynamic stiffness of the bearing small balloon, raising the vibration table capacity, 
improve low-frequency performance.  
 


composition of electrodynamic shake vibration tester

Vibration test bench, power amplify, cooling fan,Slip table,vertical expander


Design Manuscript

vibration test equipment


vibration test table



 

Parameters of electrodynamic vibration tester

Axial vibration isolation frequency

<3 Hz

Max. Payload

500 kg

Magnetic flux leakage

≤1 mT

Dimensions (L×W×H, unpacked)

1,330x860x1,250 mm

Weight (unpacked)

2,500 kg

Installation

Rubber mat (anchor bolts required)

Power Amplifier (Model# VSA-H323A)

Amplifier output

30 kVA

SNR

>65 dB

Rated output voltage

120 Vrms

Amplifier efficiency

> 90%

Dimensions (L×W×H, unpacked)

800x900x2,100 mm

Weight (unpacked)

500 kg

Blower (Model# PBL-W30)

Air volume

0.46 m3/s

Power

7.5 kW

Air duct diameter

200 mm

Air pressure

8.8kPa

Installation

Able to connect to ceiling (up to two 90 degree bends), max 20’ run

Horizontal Slip Table (Model# 30ST-600M)

Dimensions

600x600 mm

Thickness

45 mm

Frequency limit

2,000 Hz

Effective mass

54 kg

Note:

1. High pressure oil-film bearing is used for better uniformity.

Vibration Controller and Accelerometer

Vibration Controller VT-9008-4

4 Channel Vibration Controller with Sine and Self Calibration.

Accelerometer   EA-YD-181

100mV/g, Range: 50g, Working Freq.: 1-10kHz, Weight: 11gram, with 10ft low noise cable

Other supported functions/accessories

Environmental chambers

Supported

Mobile devices

Customizable

Insulation boards

Customizable

Fixture

Customizable

Working environment of the system

Temperature range

0-40℃

Humidity range

0~90% , no condensation

Power requirements

380V/3ph/50Hz, 40kVA

Compressed air pressure

0.6 Mpa

The table parameters is for the company Standard Model parameters, we support customer customization parameters


Random Vibration Test Machine Video


Previous: 
Next: 
Product Inquiry

FOLLOW US

SHARE US ON

 
Copyright © Haida Equipment Co.,Ltd.     Site Map     Powered by Haida