Paper & Packaging 
Testing Machine
Manufacturer
Share to:

MIT Folding Testing Machine

This machine is used to test the folding resistance strength of paper and cardboard, the method is to fasten the two ends of specimen on the machine, make the specimen bear a certain extent stretching force by exerting influence on the lower fixture with the needed load, the lower fixture will bend the specimen in vertical condition from side to side, the bending angle is 135 degree, and the test value will be calculated automatically when the specimen is broken.
Quantity:
  • HD-A519-2
  • HAIDA

MIT Folding Testing Machine 


PRODUCT INTRODUCTION

      This machine is specially designed to test the folding strength of paper and cardboard. The test method is to fix both ends of the test piece on the machine, and the lower clamp applies the required load to make the test piece bear a certain tension. The lower clamp faces the test piece in a vertical state. Bend the sample back and forth on the left and right sides, the bending angle is 135 degrees, until the test piece is broken, and it is automatically counted.

 

STANDARD FEATURES 

Sample size

15×(150~200)mm

Load

4.91N, 9.81N,14.72N

Control method

PLC control with touch screen

folding angle

35°±2°

Folding speed

175±10 times /min

Folding head width

19±1mm

Folding mouth Radius

0.38±0.02mm

Folding head nip distance

max 1.0mm

Counter

LCD,0~999,999

Outside dimension (LxWxH)

450×300×580mm  

Weight

 45 kg

Power

AC220V,2.6A



Product Inquiry

FOLLOW US

 
Copyright © Haida Equipment Co.,Ltd.     Site Map     Powered by Haida