Product categories

content is empty!

BC Corrugate Adhension Strength Testing Fixture Accesorry

Share to:

BC Corrugate Adhension Strength Testing Fixture Accesorry

BC Corrugate Adhension Strength Testing Fixture Accesorry use to test the adhesion strength with the paste of the single-core two side corrugated board. Insert the pin between the corrugated paper and the surface paper(or between the core paper ), corrugated groove, then press the sample with pins and make it move relatively until they separate.

Quantity:


Inquire

Model: HD-A516-2
Brand: Haida

BC Corrugate Adhension Strength Testing Fixture Accesorry

1. Application:

Corrugated board Adhension strength tester use to test the adhesion strength with the paste of the single-core two side corrugated board

Theory:

Insert the pin between the corrugated paper and the surface paper(or between the core paper ), corrugated groove, then press the sample with pins and make it move relatively until they separate.

2.Standards

GB/T6548,JIS-Z0402,CNS-3327.

Iterm	Specification
Sample Size	80*25mm
Pins	Two types of long pins, each with 10 pieces Two types of short pins, each with 10 pieces
Upper supporter	A, B, C corrugated paper, each with 3 pieces
Lower supporter	1 piece
Weight	About 2KG