All Products

content is empty!


Share to:
sharethis sharing button

Metal Tensile Test Machine

Tensile test machine uses the motor to drive ball screw to move fixture. Place the fixture with sample between the upper and lower fixture, use a given speed to pull sample upward by upper fixture. Load cell above upper fixture will sense tensile strength, and convert the strength into voltage sign and output to the display screen. And the strength value will be displayed automatically.
  • HD-B615

  • Haida

Metal Tensile Test Machine

Product Introduction:

Tensile Test Machines for rubber, plastics, plastics, films, textiles, fibers, nanomaterials, polymer materials, composite materials, packaging tapes, paper, wire and cable, fiber optic cables, safety belts, safety belts, leather belts, footwear, Tape, polymer, spring steel, stainless steel (and other high hardness steel), castings, steel plates, steel strips, non-ferrous metals, automotive parts, alloy materials and other non-metallic materials and metal materials for stretching, compression, bending, tearing Crack, 90° peel, 180° peel, shear, adhesion, pull-out force, elongation at break, etc.


1.       Tested sample: laminated materials, wood, leather, rubber & plastic, metal material, etc.

2.       Different test with different grips: tensile, peel, tear, heat seal, adhesive, bend and open force.

3.       Deformation under defined load: Test deformation under defined load of tested sample

4.       Load under defined deformation: Test load under defined deformation of tested sample

5.       Software can issue word/excel report with results for max. force, elongation, tensile strength, peel strength, tear strength, compression strength, etc.

Metal Tensile Test Machine meet but not limited following standards:

  • ASTM E8, EN 10002-1,ASTM A370: Tensile Test

  • ASTM A370: Bend Test

  • ASTM B-117, ISO 3768: Salt Spray Test

  • ISO 6508: Rockwell Hardness Test

  • ISO 6507: Vickers Hardness Test

  • ISO 6506, ASTM E10-14: Brinell Hardness

  • ASTM E23, ISO 148: Impact Test

Software and Curves

The TM2101 software is designed purposely for computer controlled electronic universal testing machine,  used for tension, compress, bend, shear, tearing and peel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force maximum deformation, yielding point and elastic modulus; this system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function.

Standard Features



Frame capacity


Load cell brand

Germany brand load cell for high   accuracy

5000kg (1000,2000kg are optional)

Load accuracy

0.5% F.S

Control system

PC with windows 7 system


Panasonic servo motor w/AC variable   speed drive system, high-precision mechanical ball screw rod

Force reading

kgf, Ibf, N, KN, T etc

Vertical test space

1100mm including fixture

Horizontal test space


Test speed

0.1~300mm/min (adjustable)


TM 2101

Curves display

Load- elongation, Elongation-time,   Time-elongation, Stress-strain

Data display

Max. force, speed, sample   information, strength(Kpa, Mpa, N/mm, N/mm2) etc…

Safety features


Over-load protection

Upper and lower limit switches

Load sensor with automatic retreat

The table parameters is for the company Standard Model parameters, we support customer customization parameters

Product Inquiry



Copyright © Haida Equipment Co.,Ltd.     Site Map     Powered by Haida