QUALITY COMES FROM TEST

Automatic burst testing machine troubleshooting and maintenance

Views: 12     Author: Site Editor     Publish Time: 2016-11-14      Origin: Site

Automatic burst testing machine troubleshooting and maintenance

Automatic burst testing machine troubleshooting and maintenance
General failure of mechanical system of automatic burst strength testing machine
  During the test, the piston returns automatically and the specimen is not cracked:
    1. The test system is running low on fuel
    2. Test system oil seepage
    3. Cylinder piston leakage
    4. The sample breaking strength is higher than the upper limit of the instrument measurement, and the instrument performs over-range automatic protection:
       1. Supplemented with silicone oil
       2. Check loose oil infiltration site and deal with accordingly
       3. Replace the O-ring (×,) on the piston body
 
     Piston action loss of control Piston stroke of the photoelectric damage to the tube, the trip switch does not move immediately stop the inspection and replacement, before the boot is strictly prohibited, otherwise it will cause damage to the instrument
     Dongguan Haida instrument professional sales rupture strength testing machine, ring pressure tester and other packaging testing equipment, the next section will continue to resolve the breakdown of your testing machine troubleshooting methods are welcome to continue to read!

FOLLOW US

SHARE US ON

 
Copyright © Haida Equipment Co.,Ltd.     Site Map     Powered by Haida