QUALITY COMES FROM TEST

All Products

content is empty!

loading

Share to:
sharethis sharing button

Corrugate for Board Adhension Strength Tester Accessory

E Corrugate for Board Adhension Strength Tester Accessory use to test the adhesion strength with the paste of the single-core two side corrugated board. Insert the pin between the corrugated paper and the surface paper(or between the core paper ), corrugated groove, then press the sample with pins and make it move relatively until they separate.
Availability:
Quantity:
  • HD-A516-3

  • Haida

E Corrugate for Board Adhension Strength Tester Accessory

 
1. Application:
Corrugated board Adhension strength tester  use to test the adhesion strength with the paste of the single-core two side corrugated board

 
Theory:
Insert the pin between the corrugated paper and the surface paper(or between the core paper ), corrugated groove, then press the sample with pins and make it move relatively until they separate.

 
2.Standards
GB/T6548,JIS-Z0402,CNS-3327.


E Corrugate for Board Adhension Strength Tester Accessory

Iterm

Specification

Sample Size

80*25mm

Pins

Two types of long pins, each with 10 pieces

Two types of short pins, each with 10 pieces

Upper supporter

A, B, C corrugated paper, each with 3 pieces

Lower supporter

1 piece

Weight

About 2KG


Previous: 
Next: 
Product Inquiry

FOLLOW US

SHARE US ON

 
Copyright © Haida Equipment Co.,Ltd.     Site Map     Powered by Haida