Paper & Packaging 
Testing Machine
Share to:

Computer Control Box Compression Test Machine

Computer Control Box Compression Test Machine referred to as box compression tester, mainly for packaging containers, corrugated boxes, paper tubes, paper tubes, plastic containers, such as anti-compression and stacking test.
  • HD-A502S
  • Haida


Computer Control Box Compression Test Machine can make compression tests of packages (boxes) or packing and determine their piling up resistance (for storage and transport).  These tests are called B.C.T. (Box Compression Test).


Computer Control Box Compression Test Machine can operate in five ways

1. Deformation under defined load: Test deformation under defined load of various corrugated cartons and beehive crates

2. Load under defined deformation: Test load under defined deformation of various corrugated cartons and beehive crates

3. Maximum load: test the maximum load of various corrugated cartons and beehive crates

4. Stacking test: stack test of various corrugated cartons and beehive crates

5. Cyclic test: dynamic strain according to strength & stroke

Computer Control Box Compression Test Machine referred to as box compression tester, mainly for packaging containers, corrugated boxes, paper tubes, paper tubes, plastic containers, such as anti-compression and stacking test. box compression tester can be completed pressure, deformation, set deformation, anti-pressure, the largest crush force and stacking test. 

Control system

Package Compression Test Machine be equipped with button type microcomputer control test compression testing machine can display sample number by LED digital display screen dynamic, sample deformation, real-time pressure, and the starting pressure. and limit stroke protection, overload protection, and fault clew and other intelligent configuration, to ensure the safety of the user's operation

Test principle

Box compression tester using the DC motor to drive the transmission system, the high-precision force sensor accurately reflects the loading condition of the test piece. The microcomputer system collects the test parameters and outputs the test results.



1. Adopting windows platform, and all the parameter settings can be processed in the dialog box, and this compression testing equipment operates easily;

2. Using a single-screen operation; do not need to switch the screen;

3. With three languages in Simplified Chinese, Traditional Chinese and English, the software interface can be switched easily;

4. The pattern of test reports can be self-designated; test data can be displayed directly in the main screen;

5. Choosing translational, comparative mode at the same time to make a number of curve data comparison;

6. With a variety of measurement units, Measure In Imperial & Metric are switchable;

7. With self-return & auto-correction function;

8. With automatic magnification function, in order to achieve the most appropriate size of the graphics;

9. With the user-defined Test methods; with experimental data analysis function;

10. Box compression tester can do test of compression, bending, pressure holding & fatigue.

11. With high precision and accuracy and reasonable price, box comprssion testing mahcine can test the crush instantaneously and stop automatically.


Design Criteria

TAPPI-T804,JIS-20212,GB4857.3.4, ASTM-D642, QB/T1048, BS EN ISO 12048, GB/T4857.16, GB/T8167, GB/T8168, GB/T4857.3,GB/T4857.4


Box compression test machine servo motor drive system, through the ball screws pressure operation, high-precision Force sensor accurately reflect the load status of the specimen, microcomputer System acquisition processing test parameters, output display test results.

Force Measurements

Compression test machine adopts Panasonic servo motor, test speed: (0.1-200) mm/min (computer arbitrary adjustment), maximum test Force in 2000KG (20KN) load decomposition in 1/250,000 range, load accuracy: ± 0.25%; unit switch: kgf, IBF, N, kn, T and other units conversion. The upper and lower stroke limit device.



Speed Control

Computer-controlled motherboard touch screen, the computer adopts TM2101 advanced computer system software control, Windows mode operation, accurate test speed range in: (0.1-200) mm/min (computer arbitrary adjustment), load decomposition degree: 1/250,000, load accuracy: ± 0.25%, overload emergency shutdown safety device.




The TM2101 software is designed purposely for computer controlled compression testing machine,  used for tension, compress, bend, shear, tearing andpeel test. With the personal computer and interface plate, it could collect, save, process and print test result. Further it can calculate multiple parameters, i.e. maximum force, yield strength, average peel force maximum deformation, yielding point and elastic modulus; this system is featured in curve process, multi-sensor support, image interface, flexible data process and powerful system function.




Test Area(mm)














We have 4 standard models for your reference,we also accept non-standard customization

This is the smallest model parameters, only for reference



Max. Force

500KG, 1000KG

Load cell

1 load cell for highest accuracy 

Control system

PC control


Panasonic servo motor w/ DC variable speed drive system, high-precision mechanical ball screw rod

Force reading 

kgf, Ibf, N etc

Load cell Resolution


Load Precision

within ±0.25%

Parallelism of Platens 

Parallel within ±2.5mm

Effective test area


Min. test height


Test speed

10 ±3mm/min (0.01~200mm/min adjustable)


TM 2101

Data display

Load, displacement, speed

Safety features


Over-load protection

Upper and lower limit switches

Load sensor with automatic retreat 

The table parameters is for the company Standard Model parameters, we support customer customization parameters

Product Inquiry


Copyright © Haida Equipment Co.,Ltd.     Site Map     Powered by Haida